Location:Home - News - Industry News
Industry News
Industry News
What is powder coating?
Font size:SMB

Powder coating is the application of a protective film to an item by spraying it with a cloud of organic plastic particles. The powder cloud is electrostatically charged by the powder coating spray gun so it is attracted to and adheres to the substrate.

 

The item is then baked in an oven to melt the powder film, during the baking process the chemistry of the powder will cross link and ‘cure’ to form a tough durable coating.

The powders are typically organic coatings made of resins such as polyester, polyurethane, epoxy or mixtures of these called hybrid powders. Each resin will have strengths and weaknesses; polyester has good UV resistance, so it is usually used in powders for exterior use. Polyurethane has good chemical resistance, so it is used in anti-graffiti coatings on component for trains etc.

Since the baking process usually occurs at around 200 degrees Celsius the substrates coated are usually metals such as steel and aluminium. The advent of low bake powders has allowed the technology to be used on other substrates such as MDF timber and plastics.

In order to provide a durable coating for metal products used outside it is necessary to ‘pre-treat’ the metal. The pre-treatment process cleans the surface of the metal so it free of of oils, grease and dirt and then a conversion process takes place to apply a chemical layer that is resistant to corrosion. Powder coating alone will not provide a corrosion resistant coating on metal.

See the Corrosion Resistance section for more information.

Typical pre-treatments are zinc or iron phosphate conversion coatings for steel products and chromate conversion for aluminium. New pre-treatment technologies such as Zirconium and Silan based conversion coatings are more environmentally friendly and produce better results on a range of metal substrates.

图片1.png


Updated:2020-06-18 | Return
This article keywords: